prodracing.com

Unofficial SCCA Production Racing Forum
It is currently Mon Oct 14, 2019 5:55 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Seat Insert
PostPosted: Mon Oct 07, 2019 9:38 am 
Offline

Joined: Fri Dec 02, 2016 7:52 am
Posts: 29
Hi all,
I would like to draw on the wisdom of the group. I have result lose a lot of weight (about 70 pounds). During the last race weekend I was moving in my seat and it is obvious I will need to build a insert for my seat prior to next year as a plan on losing at least another 50 pounds. I have no experience with ding this so I though I'd ask the group for advice on materials and methods to built an insert. I would rather not buy a seat until I lose all the weight. Might be another year. So I think it would be better to build multiple insert in the interim.

Thanks for any help

Dave Reiter
14 FP Mazda 626


Top
 Profile  
 
 Post subject: Re: Seat Insert
PostPosted: Mon Oct 07, 2019 10:03 am 
Offline

Joined: Sun Jan 23, 2011 4:54 am
Posts: 1910
There are molded/pourable foam and bead insert kits which you can use to take up the room. perfect solution to your problem. they're not the cheapest, but they're definitely safe. however, if you're still on the weight loss track (good for you! I need to lose about 75lb myself), you would quickly find yourself not fitting into a moulded seat either, and then you've spent a bunch of money for little gain.

https://www.pegasusautoracing.com/produ ... oduct=4525

https://www.kirkeyracing.com/product/30 ... INSERT-KIT


another option would be simple foam insert sheets or a combination of both of the above. start with a bead kit now and then add some foam bolsters or something after that as you continue losing weight.

_________________
Matt Blehm
Houston Region
EP 1st Gen RX7
STU Nissan 240SX


Top
 Profile  
 
 Post subject: Re: Seat Insert
PostPosted: Mon Oct 07, 2019 12:12 pm 
Offline

Joined: Wed Apr 27, 2011 7:33 am
Posts: 301
maybe someone can tell me why this was a bad idea but I have taken a thick big trash bag (job site type), put it in the seat, sat in it and then with several cans of spray foam made an insert. Held up very well for about 6-7 race weekends. Cheap fix.
ez


Top
 Profile  
 
 Post subject: Re: Seat Insert
PostPosted: Mon Oct 07, 2019 12:18 pm 
Offline

Joined: Sun Jan 23, 2011 4:54 am
Posts: 1910
The reason it's a bad idea is fire + "that stuff" = toxic fumes.
the high dollar kits are made from stuff that won't destroy your lungs (as bad?) should you light your interior on fire.
However, for a temp fix or whatever, I'm not gonna judge. slice open an old nomex race suit and cover it with that prior to stuffing it in the car and you're slightly better protected in case the proverbial excrement strikes the rotating air handler.

_________________
Matt Blehm
Houston Region
EP 1st Gen RX7
STU Nissan 240SX


Top
 Profile  
 
 Post subject: Re: Seat Insert
PostPosted: Mon Oct 07, 2019 1:18 pm 
Offline

Joined: Fri Dec 23, 2011 6:59 am
Posts: 1224
Location: Spring Hill, FL.
They now make "firestop" foam . By the time you buy 6 cans for a seat you could buy the real 2 part bag.
But,, I'm not sure the old style of foam seat kit is fire resistant .
When using cushions ,pads, ect, in a large seat ,make sure that you are still contained inside of the walls . IE dont fall out in a lateral impact.

_________________
Mike Ogren/Protech Racing, http://www.FWDracingguide.com http://www.ogren-engineering.com/ 352.428-8983 mogren@tampabay.rr.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group