prodracing.com

Unofficial SCCA Production Racing Forum
It is currently Fri Dec 13, 2019 4:49 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 13 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Wed Sep 04, 2019 12:27 pm 
Offline

Joined: Fri Dec 23, 2011 6:59 am
Posts: 1269
Location: Spring Hill, FL.
Anyone sell their car and have a pile in the top of their box??
Save me .. Italy's revenge has got me by the leg.
Thanks,MM

_________________
Mike Ogren/Protech Racing, http://www.FWDracingguide.com http://www.ogren-engineering.com/ 352.428-8983 mogren@tampabay.rr.com


Top
 Profile  
 
PostPosted: Thu Sep 05, 2019 4:37 am 
Offline

Joined: Sat Aug 10, 2019 7:05 am
Posts: 1
I'm pretty sure I have that box stowed away, just have to look. Are you looking for every step 140, 145, 150, 155 and 160?

Don Tucker
EP Miata


Top
 Profile  
 
PostPosted: Thu Sep 05, 2019 7:34 am 
Offline

Joined: Fri Dec 23, 2011 6:59 am
Posts: 1269
Location: Spring Hill, FL.
Thanks. Begging, not choosing. I can make the holes larger.

_________________
Mike Ogren/Protech Racing, http://www.FWDracingguide.com http://www.ogren-engineering.com/ 352.428-8983 mogren@tampabay.rr.com


Top
 Profile  
 
PostPosted: Thu Sep 05, 2019 10:51 am 
Offline
User avatar

Joined: Wed Apr 29, 2015 1:43 pm
Posts: 10
If you don't find what you are looking for, Pierce Manifolds has a good selection of jets and they are easy to work with.

Guy

_________________
San Francisco Region SCCA
1995 RX7 GT3
1993 RX7 ITE


Top
 Profile  
 
PostPosted: Thu Sep 05, 2019 3:05 pm 
Offline
User avatar

Joined: Tue Aug 20, 2002 10:01 am
Posts: 2637
Location: Belmont, CA
Guy Laidig wrote:
If you don't find what you are looking for, Pierce Manifolds has a good selection of jets and they are easy to work with.

Guy


I too have had great service from Pierce Manifolds. I normally get parts the next day.

_________________
Tim Linerud
#95 GTL VW Rabbit GTI
2014 Runoffs Sunoco Hard Charger - GTL
2016 Western Conference GTL Champion


Top
 Profile  
 
PostPosted: Sat Sep 07, 2019 9:51 am 
Offline

Joined: Fri Dec 23, 2011 6:59 am
Posts: 1269
Location: Spring Hill, FL.
I 'm cheap and would like to help out racers that dont need them anymore for one .
The bits I have received from Pierce so far have had the jets too small or the holders too big , with no taper and fall out of the holder. I had to squeeze the holders . The few OE jets and holders have a nice snug fit.

The jets are very nice , sourced from Prague. through Ebay.

If anyone has air jets from 140-160, I would pay 4 per 12$ .
Main jets of 125-150, same 12 $ per 4

Thanks, Protech
1220 Broad st.
Brooksville FL
34604 -6812.

_________________
Mike Ogren/Protech Racing, http://www.FWDracingguide.com http://www.ogren-engineering.com/ 352.428-8983 mogren@tampabay.rr.com


Top
 Profile  
 
PostPosted: Mon Sep 09, 2019 12:46 pm 
Offline

Joined: Fri Dec 23, 2011 6:59 am
Posts: 1269
Location: Spring Hill, FL.
I have enough!! Thanks Prod.

_________________
Mike Ogren/Protech Racing, http://www.FWDracingguide.com http://www.ogren-engineering.com/ 352.428-8983 mogren@tampabay.rr.com


Top
 Profile  
 
PostPosted: Thu Sep 12, 2019 7:19 pm 
Offline

Joined: Wed Aug 17, 2011 7:42 am
Posts: 89
Try carbdeals.com, they are in the Czech Republic and ship next day, no duty. You can pick any set of 4 or 6, air or main, what ever you want. They fit the emulsion tubes just like the over priced stuff from US suppliers. They have all the ancillary bits and pieces for the outside and inside of the carbs. I have found their parts work just fine, and beat the crap out of what's available here in the US. They can also be found on fleabay under weber carbs. I bought a set of 152G's for my Zetec engined Lotus Elan Plus2, and they work perfect.


Top
 Profile  
 
PostPosted: Fri Sep 13, 2019 7:56 am 
Offline

Joined: Fri Dec 23, 2011 6:59 am
Posts: 1269
Location: Spring Hill, FL.
Thanks. I already have some stuff on order from them. Takes about 15days . No big hurry as I compression checked the engine. Sent the cam out yesterday.

Tell me more about the Zetec in the Elan . I have a couple customer 7S with Zetec, 1 Carbed and one Microsquirted.
And one Elan customer that needs an engine. How does the engine get hooked to the trans? Thanks,MM

_________________
Mike Ogren/Protech Racing, http://www.FWDracingguide.com http://www.ogren-engineering.com/ 352.428-8983 mogren@tampabay.rr.com


Top
 Profile  
 
PostPosted: Sat Sep 14, 2019 7:50 am 
Offline

Joined: Wed Aug 17, 2011 7:42 am
Posts: 89
Check your email.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ]  Go to page 1, 2  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: Acme Speed Shop and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group